List of Publications
- Formation of fine composites, Fine Particles:systhesis,
characterization, and mechanisms of growth / edited by Tadao
Sugimoto, Marcel Dekker, Inc., New York, 2000, pp.699-720
- Properties of cattle bone powder-coated composite particles
as high-performance and open column liquid chromatographic column
packings, J. Chromatography, 813, 21-33(1998)
- Double-layered composite particles as a complex stationary
phase for high-performance liquid chromatography, J. Chromatography,
775, 13-27(1997)
- Development of sustained-release formulation of chlorpheniramine
meleate using powder-coated microsponge prepared by dry impact
blending method, Yakuzaigaku, 56(1), 49-56(1996)
- Mechanochemical calcination of calcium carbonate, Shikizai,
68(11), 665-672(1995)
- Utilization of the dry impact blending method to prepare
irregular-shaped particles for HPLC column packings, J. Chromatography,
696, 19-30(1995)
- Preparation of monolayer particle coated powder by the dry
impact blending process utilizing mechanochemical treatment,
Colloids and Surfaces A:Physicochem. Eng. Aspects, 82,
117-128(1994)
- Effects of dry grinding of zinc oxide, J. of the Japan
Soc. of Colour Material, 67, 351-355(1994)
- Drug dissolution from indomethacin-starch hybrid powders
prepared by the dry impact blending method, J. Pharm. Pharmacol.,
26, 770-774(1992)
- Application of non-porous silica ultramicrospheres to high-performance
liquid chromatographic column packings, J. Chromatography,
609, 770-774(1992)
- The mechanochemical effects of dry-grinding by auto-mortar
and vibration-mill on the zinc oxide powder, Zairyo Gijutsu,
10, 250-257(1992)
- Preparation of composite and encapsulated powder particles
by dry impact blending, Chimica oggi, 9, 21-26(1991)
- Effect of surface modification of the base wax on release
of a water-soluble drug from wax matrices, Chimica oggi,
8, 41-46(1990)
- Discrimination of the state of the surface of modified particles
in a liquid medium by the use of AC-impedance, J. Soc. Powder
Technol. Japan, 27, 609-618(1990)
- Preparation of colloid modified polymer particles by dry
impact blending preparation method, Zairyo Gijutsu, 8,
348-355(1990)
- Analysis of the powder surface modification processes by
computer simulation, Zairyo Gijutsu, 8, 54-60(1990)
- Characterization of powder-coated microsponge prepared by
dry impact blending method, Chem. Pharm. Bull., 37,
3367-3371(1989)
- The effect of powder properties on the dry impact blending
preparation method, J. Soc. Powder Technol. Japan, 26,
666-671(1989)
- Effect of titanium dioxide on dye dissolution from nylon
12 sphere, Zairyo Gijutsu, 7, 136-142(1989)
- Dry impact blending preparation and properties of encapsulated
polymer and starch, Zairyo Gijutsu, 7, 55-66(1989)
- Preparation of drug-diluent hybrid powders by dry processing,
J. Pharm. Pharmacol., 41, 361-368(1988)
- Measurement of penetration rate and wettability of various
liquids for alumina powder bed, Zairyo Gijutsu, 6,
186-192(1988)
- Surface modification of polymer fine powder, J. of the
Japan Soc. of Colour Material, 61, 659-664(1988)
- Preparation of a graphite fluoride modified-polymer microsphere
by a high speed impact treatment method, J. Soc. Powder Technol.
Japan, 25, 597-602(1988)
- Complexation of aspirin with potato starch and improvement
of dissolution rate by dry mixing, Chem. Pharm. Bull.,
36, 2562-2569(1988)
- Dry impact blending preparation and properties of encapsulated
powder nylon 12, Chimica oggi, 5, 43-45(1987)
- Surface modification of powders by the high speed impact
treatment method, J. Soc. Powder Technol. Japan, 24,
593-599(1987)
- Measurement of penetration rate and wettability of various
liquids for silica gel powder bed, Zairyo Gijutsu, 5,
520-525(1987)
- Measurement of penetration rate of water and alcohol homologues
for titanium dioxide modified nylon 12 powder bed, Zairyo
Gijutsu, 5, 464-471(1987)
- Studies on terminology and application of ordered mixture,
under the consideration of technical information management,
Zairyo Gijutsu,5, 403-414(1987)
- Gas leakage quantity in the non-impregnated area during impregnation
through polyester non-waven fabric, Zairyo Gijutsu, 5,
209-215(1987)
- Impregnation rate equation and analysis of gas solublity
for the liquid resin impregnation, Zairyo Gijutsu, 5,
100-107(1987)
- Diglycidylether bisphenol a adsorption and wettability on
polyester surface during impregnation through polyester non-woven
fabric, Zairyo Gijutsu, 5, 47-54(1987)
- Packing properties of modified powders prepared by powder/powder
blending method, Zairyo Gijutsu, 4, 325-336(1986)
- Contact angles and wetting of hydroxypropyl cellulose-drug
blended powders, Zairyo Gijutsu, 4, 317-324(1986)
- Automatic measurement of liquid penetration into a powder
bed by the application of microcomputer, Zairyo Gijutsu,
3, 489-502(1985)
- Measurement of surface properties of modified nylon 12/titanium
dioxide powder, Zairyo Gijutsu, 3, 380-387(1985)
- Preparation of modified powder by dry blending and applications
to cataplasmata preparations, Zairyo Gijutsu, 3,
241-251(1985)
- Surface modification by mechanochemical method in powder/powder
system, Zairyo Gijutsu, 3, 187-195(1985)