発表論文
Published Papers
(Since 1986 :1986年以降 )
TOP
- "Oリングの変形を利用した静圧形気体ジャーナル軸受(静的特性)”
吉本成香、角張毅
日本機械学会論文集 Vol.52 No.473 70-80 (1986)
- "Static chracteristics of an aerostatic journal bearing with
partially gas-fed slot restrictors using feeding slits"
S.Yoshimoto
Bull. of JSME, Vol.29 No.252 1907-1912 (1986)
- "軸受部材の変形を利用した環状スロット給気軸受の静的特性”
吉本成香、阿武芳朗、大橋哲洋
日本機械学会論文集 Vol.53 No.485 131-135 (1987)
- "環状スロット給気気体ジャーナル軸受における回転軸の安定性
(2列給気軸受の場合)”
吉本成香、阿武芳朗、大橋哲洋
日本機械学会論文集 Vol.53 No.486 412-419 (1987)
- "Improvement of static characteristics of an aerostatic journal
bearing using the elastic deformation of O-ring"
S.Yoshimoto
Tribology Int. Vol.20 No.5 290-296 (1987)
- "Stability of a rigid rotor supported by aerostatic journal
bearings with circular slot restrictors
( on the double-row
admission bearing)"
S.Yoshimoto, Y.Anno, T.Ohashi
Trans. of ASME., J. of Trib. Vol.110 No.2, 228-234 (1988)
- "A theoretical investigation of the effect of inlet pocket size on
the performance of
hole entry hybrid journal bearings employing
capillary restrictors"
S.Yoshimoto, W.B.Rowe, D.Ives
Wear Vol.127 No.3 307-318 (1988)
- "Static characteristics of a slot-entry gas journal bearing
with feeding holes"
S.Yoshimoto
Trans. of ASME., J. of Trib. Vol.110 No.4,587-591 (1988)
- "浮動円板を用いた可変絞り形静圧スラスト軸受(第一報 静的特性)”
吉本成香、 阿武芳朗、 川嶋聡
日本機械学会論文集 Vol.55 No.512 1084-1090 (1989)
- "浮動ブッシュ静圧気体ジャーナル軸受に関する研究
(第一報 スロット絞りを用いた場合)"
吉本成香、 阿武芳朗、 井伊谷隆
日本機械学会論文集 Vol.56 No.521 116-121 (1990)
- "Floating Bush Aerostatic Journal Bearing employing Slot
Restrictors"
S.Yoshimoto, Y.Anno, T.Iiya
Proceedings of 3rd International Conference of Rotor Dynamics
99-103 (1990)
- "可変絞り形静圧ジャーナル軸受に関する研究(静的特性)"
吉本成香、阿武芳朗、甘利浩一
日本機械学会論文集 Vol.56 No.532 3360-3367 (1990)
- "圧電素子を用いた動圧形スクイーズ案内面"
吉本成香、阿武芳朗
トライボロジスト(日本潤滑学会誌) Vol.36 No.7 47-52 (1991)
- "浮動円板を用いた可変絞り形静圧スラスト軸受 (ステップ応答特性)"
吉本成香、阿武芳朗、田中隆康
日本機械学会論文集 Vol.57 No.542 C 3386-3392 (1991)
- "Squeeze-Film Gas Bearing for a Linear Motion Guide Using a
Piezoelectric Actuator"
S.Yoshimoto, Y.Anno
Jpn. Jour. of Trib., Vol.37 No.7 755-764 (1991)
- "圧電素子を用いた動圧形スクイーズ案内面(リニアガイドへの応用)"
吉本成香、阿武芳朗
精密工学会誌 Vol.58 No.3 527-532 (1992)
- "浮動円板を用いた可変絞り形静圧気体スラスト軸受(静的特性)"
吉本成香、阿武芳朗、平川泰
日本機械学会論文集 Vol.58 No.549 C 3386-3392 (1992)
- "サブミクロンの軸受すきまで動作する静圧気体スラスト軸受(静的特性)"
吉本成香、阿武芳朗、温品貴幸
精密工学会誌 Vol.58 No.12 2081-2086 (1992)
- "Hydrostatic Thrust Bearing with Actively Controlled Restrictor
Making Use of a Piezoelectric Actuator"
T.Nakamura, N.Taketomi, A.Inagaki, S.Yoshimoto
Int. J. of JSPE Vol.26 No.4 (1992) 340-341
- "Static Characteristics of a Rectangular Hydrostatic Thrust Bearing
with a Self-controlled Restrictor employing a Floating Disk"
S.Yoshimoto, Y.Anno, M.Fujimura
Trans. ASME, J of Trib. Vol.115 No.2 (1993) 307-311
- "真空ポンプ機能を持つレーザスキャナ用動圧形空気軸受
(ポンピング特性 の理論解析)"
吉本成香、阿武芳朗、伊藤幸夫
日本機械学会論文集 Vol.59 No.562 1836-1841 (1993)
- "浮動円板を用いた可変絞り形静圧スラスト軸受(周波数応答特性)"
田中隆康、吉本成香、阿武芳朗
日本機械学会論文集 Vol.59 No.562 1842-1848 (1993)
- "Rectangular Squeeze-Film Gas Bearing Using a Piezoelectric
Actuator (Application to a Linear Motion Guide)"
S.Yoshimoto, Y.Anno
Int. J. of JSPE Vol.27 No.3 259-263 (1993)
- "Step Response of Hydrostatic Thrust Bearing with a Self-Controlled
Restrictor employing a Floating Disk"
S.Yoshimoto, Y.Anno, T.Kanemoto
Trans. ASME, J. of Trib. Vol.116 No.1 154-160 (1994)
- "Aerostatic Thrust Bearing with a Self-Controlled Restrictor emp
loying a Floating Disk (Static Characteristics)"
S.Yoshimoto, Y.Anno, Y.Hirakawa
JSME Int. Jour. Vol.37 No.2 369-375 (1994)
- "弾性ヒンジを用いた動圧形スクイーズ空気案内面"
吉本成香、阿武芳朗、佐藤祐一、浜中憲二
日本機械学会論文集 Vol.60 No.574 2122-2127 (1994)
- "真空ポンプ機能を持つレーザスキャナ用動圧形空気軸受
(ポンピング特性の実験結果)"
伊藤幸夫、吉本成香、阿武芳朗、川端信義
日本機械学会論文集 Vol.60 No.574 2109-2115 (1994)
- "Static Tilt Characteristics of Rectangular Double-Pad Thrust
Bearings with Compound Restrictors
T.Nakamura, S.Yoshimoto
Trib. Int. Vol.29 No.2 (1996) 145
- "浮動ブッシュを用いた可変絞り型静圧気体ジャーナル軸受に関する研究(静的特性)"
吉本成香、神山茂樹
日本機械学会論文集 Vol.61 No.591 (1995) 4443
- "円板型多孔質静圧気体スラスト軸受に関する研究"
岩藤任善、吉本成香
日本機械学会論文集 Vol.62 No.593 Ser.C (1996) 276
- "圧電素子を用いた高速応答型流量制御弁に関する研究"
吉本成香、阿武芳朗、浜中憲二
日本機械学会論文集 Vol.62 No.593 Ser.C (1996) 243
- "An Aerostatic Thrust Bearing with a Stiffness of 1N/nm"
S.Yoshimoto
Nanotechnology Vol.7 No.1 (1996) 52
- "Axial Load Capacity of Water-Lubricated Hydrostatic
Conical Bearings with Spiral Grooves
(On the Case of Rigid
Surface Bearings)"
S.Yoshimoto, Y.Anno, M.Tamura, Y.Kakiuchi
Trans. ASME J.of Trib. Vol.118 No.4 (1996) 893
- "Float Characteristics of Squeeze-Film Gas Bearing with
Elastic Hinges for Linear Motion Guide"
S.Yoshimoto, Y. Anno, Y. Sato and K. Hamanaka
Int. J of JSME, Vol. 40 No.2 (1997) 353
- "能動型可変絞り油静圧スラスト軸受に関する研究(静的特性)"
金岡晃廣、吉本成香
日本機械学会論文集 Vol. 63 No. 610 (1997) p2099-2104
- "Static tilt characteristics of double-pad thrust bearing with double-row admissions"
T. Nakamura, S. Yoshimoto
Tribology Int. Vol.30 No.8 (1997) p605-611
- "Axial load capacity of water-lubricated hydrostatic conical bearings with spiral grooves for high speed spindles"
S.Yoshimoto T.Kume
Tribology Int. Vol.31. No.6 (1998) p331-338
- "能動型可変絞り油静圧スラスト軸受に関する研究(ステップ応答特性)"
金岡晃廣、吉本成香
日本機械学会論文集 Vol. 64 No. 625 (1998) p3616-3622
- "Step Response Characteristics of Hydrostatic Journal Bearing with Self
-Controlled Restrictor Employing a Floating Disk"
S.Yoshimoto, K.Kikuchi
Trans. ASME J. of Trib. Trans. ASME, J.of Trib., Vol.121, No.2 (1999) p315-320
- "A method of Reducing Windage Power Loss in a Laser Scanner Mirror by Using the Pumping
Effect of Herringboen-Grooved Gas Journal Bearings"
S. Yoshimoto, A. Takahashi
Trans. ASME J. of Trib. Vol.121 No.3 (1999)
- "円板型多孔質静圧気体スラスト軸受に関する研究(給気部形状の影響)"
吉本成香、河野一史
日本機械学会論文集 Vol.65, No.630 (1999) p759-765
- "変位補償型静圧気体スラスト軸受の研究(静的特性)
武富尚之、境嘉久、吉本成香
精密工学会誌、Vol.65,No.4, (1999) p554-558
- "Dynamic characteristics of aerostatic rectangular double-pad thrust bearings
with compound restrictor"
S. Yoshimoto, J. Tamura, T. Nakamura
Tribology International Vol.32, No.12 (1999) p731-738
- "分岐部脳動脈流の流れの可視可"
氏家弘(東京女子医大)、吉本成香、武田秀一郎
脳卒中の外科学会機関誌、Vol.27, No.6, (1999) p439-445
- "小型可変絞りによる無限剛性静圧スラスト軸受の動特性向上法"
吉本成香、湯浅修
日本機械学会論文集 Vol.66 No.641 (2000) p261-266
- "Pumping Characteristics of a Herringbone-grooved Journal Bearing Functioning
as a Viscous Vacuum Pump"
S. Yoshimoto, A. Takahashi, Y. Ito
Trans ASME J. of Trib. Vol.122 No.1 (2000) p131-136
- "複合絞り型静圧空気スラスト軸受の安定性向上法"
城千賀,吉本成香
日本機械学会論文集,Vol.66, No.650, C (2000), p3456-3461
- "スクイーズ効果を用いた動圧型エアスライドテーブルに関する研究"
風戸昭人,吉本成香
日本機械学会論文集,Vol.66, No.650, C (2000), p3462-3468
- "Static and Dynamic Characteristics of Aerostatic Circular Porous Thrust Bearings
(Effect of the Shape of the Air Supply Area)"
S. Yoshimoto, K. Kohno
Trans ASME, J. of Tribology Vol.123, No.3,(2001) p501-508
- "すきまと外部をカップリングした高浮上ヘッドスライダ周りのナビエ・ストークス解析"
島野健二郎、吉本成香
日本機械学会論文集 67巻664号 C (2001) p3977〜3984
- "真空ポンプ機能を持つレーザスキャナ用動圧型空気スラスト軸受に関する研究"
田口信幸、吉本成香、檀原伸補
精密工学会誌 Vol.67, No.8 (2001) p 1244〜1248
- "中大脳動脈瘤の流体力学的特徴"
氏家弘(東京女子医大)、吉本成香
脳神経外科 Vol.29, NO.10 (2001) p921-930
- "Stability of Water-Lubricated, Hydrostatic, Conical Bearings with Spiral Grooves for High-Speed Spindles"
S. Yoshimoto, S. Oshima, S.Dambara
Trans ASME, J. of Tribology Vol.124, No.2 (2002) p389- 405
- "高真空対応型静圧空気ジャーナル軸受の排気システムに関する研究"
吉本成香、吉田雄一、檀原伸補
精密工学会誌 Vol.68, No.4 (2002) p597- 601
- "HDD用ラビリンスシールにおける微小油滴のシール性能に関する研究"
宮武正明、吉本成香、檀原伸補
日本機械学会論文集 68巻675号 C (2002) p3402〜3408
- "中圧給気領域における複合絞り型静圧空気ジャーナル軸受の動的特性に関する研究"
富川淳、吉本成香
日本機械学会論文集 68巻675号 C (2002) p3409〜3415
- "Static characteristics of aerostatic porous journal bearings with a surface-restricted layer"
S. Yoshimoto, H. Tozuka, S.Dambara
Imeche, J. of Eng. Trib. Vol.217, No.J2 (2003) p125- 132
- "The seal System in Aerostatic Journal Bearings for High Vacuum Chambers"
S.Yoshimoto, Y.Yoshida, K. Yagi
Trans. ASME J. of Tribology Vol. 126 No.2 (2004) p310-315
- "Sealing Performance of Labyrinth Seals Against Small Particles in HDDs"
M. Miyatake S. Yoshimoto
JSME Int. Jour. Vol.47, No.2 (2004) 755 761
- "動脈瘤とaspect ratio(aneurysm depth/neck width)の相関"
氏家弘 比嘉隆 佐々木久里,堀智勝 (東京女子医大)吉本成香
脳卒中の外科 32 ( 2004) 351〜355
- "スラスト/ジャーナル一体型多孔質静圧気体軸受の静的特性に関する研究"
宮武正明,吉本成香
日本機械学会論文集 71-702 (2005-2) 731-737
- "深溝付多孔質静圧気体スラスト軸受に関する研究"
宮武正明,吉本成香
日本機械学会論文集 71-702 (2005-2) 738-744
- "An aerodynamic bearing with adjustable geometry and self-lifting capacity. Part 1: self-lift capacity by squeeze film
Ha,D.N, Stolarski,T.A, (Brunel Univ., UK) S. Yoshimoto
Proceedings of the Institution of Mechanical Engineers - J 219- 1 (2005) 33-39
- 最近の論文につきましては,本学HP「研究者データベース:RIDAI」をご覧下さい.